Go! What do we do with the 5 star scouts?? |

What do we do with the 5 star scouts??

2021.04.19 07:24 Johnny_141 What do we do with the 5 star scouts??

I mean we could have got like random 5 star scouts but what do we do with 6 juventus scout?? Plus featured players are better than its original version anyway, what do we do with those scout?
submitted by Johnny_141 to pesmobile [link] [comments]


2021.04.19 07:24 iMustBeStoned What's a good reason to kill someone?

submitted by iMustBeStoned to AskReddit [link] [comments]


2021.04.19 07:24 dataentrytard Enter to win a $20 Amazon Gift Card. 52 Winners! (12/31/2021) {US}

Enter to win a $20 Amazon Gift Card. 52 Winners! (12/31/2021) {US} submitted by dataentrytard to giveaways [link] [comments]


2021.04.19 07:24 temmiesayshoi Does mullvad block VLANs?

I am having some issues connecting to a game server hosted on one of my computers remotely and I think it may be mullvad interfering. I was able to connect to the server just fine, using the same IP as I am trying now, from the computer itself (i.e. localhosting) so I know that the computer knows that it is the IP I am trying to use in my VLAN but I am still getting the error. Before I started using mullvad I was able to connect fine. (although it has been a few months so I'm not sure) Is there a way I can make mullvad allow unencrypted traffic along some network adapters, namely VLAN programs where you already have an encrypted connection and are likely in personal control of every computer on the network? I could theoretically test this, but right now I can only RC the computer running my server and if I change anything with mullvad it will kill its connection so if it gets stuck for some reason (for instance I turned off mullvad without turning off "always require VPN" thus blocking the computer's internet and not allowing me to RC to turn mullvad back on) I just won't be able to access it for days.
submitted by temmiesayshoi to mullvadvpn [link] [comments]


2021.04.19 07:24 AgreeableLandscape3 How bad an idea is a single-drive NAS?

I'm trying to build a NAS for cheap by basing it around a single-board computer, but most of the available SBCs out there only support a single SATA or even USB drive. I know that professional applications require redundancy, but what about simple personal data archival? How bad an idea is it to have a single-drive NAS for personal use?
submitted by AgreeableLandscape3 to homelab [link] [comments]


2021.04.19 07:24 Overall_Address_1967 Kamelot not as good anymore?????

Hey.
Any Kamelot fans around here?
Please..
If you can...
Don't throw (too many) stones at me.....
Okay?
But...
I just wanted to ask.....
Is it just me....
Or is Kamelot not as good, as it once was, before?
I REALLY prefer the Khan era.
(And I'm not just being nostalgic here, mind you.)
It's just..
I REALLY dislike, Tommy's voice, at times.
It's too.. Smooth, for me...
Too soft..
Too...
"Melodic" is the word I'm looking for.
Now, I know, a LOT of people say that their voices sound a LOT alike.
Well, I disagree.
Also, I think the band has been using too much sound effects, for my taste (expecially on their latest album, "The Shadow Theory")
Whereas, their sound was SO much simpler, back then.
My brother (who actually introduced me to the band), lost interest, after Khan left.
Recently, though, he's been really digging their new records.
But it's just NOT working out for me.
For a long time, I only listened to "Silverthorn", fully, off this era.
Plus, half of "Haven".
And 4 tracks off "The Shadow Theory".
I listened to "Haven" (fully), 4 days ago.
I also JUST listened to "The Shadow Theory" (fully).
Off this one, I only really like ONE track: "Phantom Divine (Shadow Empire)".
Plus, the intro to the album, "The Mission", "RavenLight", "Amnesiac", and "Vespertine (My Crimson Bride".
(I really dig the the children's choir at the end of "Burns to Embrace". But only that...)
And that's it.
That's it for me.
Plus, I think it's kind of lame that on "Haven", you "have to get" to THE VERY END of the album... To listen to the title track. And it's just... An instrumental track. And a REALLY short one, at that. One of the SHORTEST tracks on the album, actually.
And it seems to me, that "The Shadow Theory", kind of followed the same formula, off its predecessor.
I mean..
The last track??? Another instrumental track. And a REALLY short one, too (shortest track off the record, after "The Mission").
I also think it's lame, that they also release bonus disks, with instrumental versions off almost all the tracks. What's the point in that?????
(Mind you, I DON'T dislike instrumental tracks.)
I prefer even their most maligned albums, than these new ones.
Give me "Siege Perilous", "Ghost Opera" (I actually own this one!)(Plus, two more!), and "Poetry for the Poisoned", any day.
But "Silverthorn", "Haven", "The Shadow Theory"???
Ugh...
(Sigh)
Guess I'd just prefer Roy was still in the band.
Oh, well..
Nothing to do about that.
Guess I'll just try to console myself, listening to "new Conception".
(Even though, I think their new stuff ALSO ISN'T as good as their old stuff, IMHO.)
Look...
I'm not trying to start a fight, or something, around here...
Just wanted to share my thoughts...
Hope that's okay...
Any thoughts??
(P.S.: sorry for any errors. English is not my mother tongue.)
submitted by Overall_Address_1967 to kamelot [link] [comments]


2021.04.19 07:24 RealGrenFrog She's only 3 weeks old

She's only 3 weeks old submitted by RealGrenFrog to Eyebleach [link] [comments]


2021.04.19 07:24 -mrsackerman- (will take down if not cringe) bakugo would probably hate your guts not have a full on romantic relationship with you, the only people he can stand is kirishima and kaminari. he definitely wouldn't like you.

(will take down if not cringe) bakugo would probably hate your guts not have a full on romantic relationship with you, the only people he can stand is kirishima and kaminari. he definitely wouldn't like you. submitted by -mrsackerman- to GachaClubCringe [link] [comments]


2021.04.19 07:24 Mack_24 The JX-Pro is NOT 12.5 microns per "click", and here's why:

As the title says, I have come to find that the info I've seen online about each "click" being 12.5 microns, is incorrect.
The Dilemma:
I've had my JX Pro for about two months now, and I brew at least twice a day. Typically, pour overs with v60/Kalita or espresso with the Flair Pro 2. I record every variable about each brew I make, so I can go back to see what variables I need to change, and by how much.
Allow me to define some terms, and try to set the scene. So far as I understand, a ”click" is each setting/dot on the adjustment dial. So, each time it clicks as you turn the dial. By this understanding, 3.3.2 (3 full rotations, then number 3 on the dial, then the second small dot) should be 134 "clicks". If this is correct, then multiplying 134 clicks by 12.5 microns per click, gives us 1,675 microns.
That's a whole millimeter and a half. I've read and watched enough about pour over grind size to know that about 400-800 microns is typical. So, I highly doubt that my 2 minute 45 second v60, that was dialed in based on grinding courser when bitter, and finer when sour, is actually at 1,675 microns, or french press size.
My espresso has been dialed in to a 35 second, 8 bar shot at 1.5.2. That would be 62 clicks, and according to our 12.5 number, 775 microns. This is absolutely impossible. Average espresso is around 200 microns. At 775 microns, the "shot" would be done in an instant.
The Solution:
So, my answer to this conundrum is that this idea of "clicks" is incorrect.
These numbers can be resolved by understanding that this 12.5 micron number is related to the actual numbers on the dial. Each number on the dial is 12.5 microns and each single click of the dial would, therefore, be 3.125 microns.
By applying this to my pour over grind size, 3.3.2 yields 418.75 microns; well within the normal range. And when applied to the espresso grind size of 1.5.2, we get 193.75 microns, which is also right in the ballpark that it should be.
Based on this, I think the number of 12.5 microns per click is not accurate, and rather, is per number on the dial. I hope this could help with anyone else who has the JX-Pro. Since it is gaining popularity quickly, I wanted to clear this up.
Lastly,
I'd love to hear what you all have to say about my findings. Do you think I'm mistaken? Have I miscalculated something? Or do you agree? Should we change our language from "clicks" to numbers? For those of you that also have the JX Pro, what are your results?
I'd love to hear your thoughts in the comments!
submitted by Mack_24 to Coffee [link] [comments]


2021.04.19 07:24 dataentrytard Enter to win a $20 Amazon Gift Card. 52 Winners! (12/31/2021) {US}

Enter to win a $20 Amazon Gift Card. 52 Winners! (12/31/2021) {US} submitted by dataentrytard to sweepstakes [link] [comments]


2021.04.19 07:24 princeevil666_ weird pt 2

weird pt 2 submitted by princeevil666_ to upvote [link] [comments]


2021.04.19 07:24 Muerssss Yep. The other WSB sub that was intended to be a refuge for the OG WSB sub... got compromised, as wel. Ive been seeing obvious shill posts lately and the group has been overrun by them. The more I see them, the more I buy and HODL. The guy who posted this shitted at AMC stock, too.

Yep. The other WSB sub that was intended to be a refuge for the OG WSB sub... got compromised, as wel. Ive been seeing obvious shill posts lately and the group has been overrun by them. The more I see them, the more I buy and HODL. The guy who posted this shitted at AMC stock, too. submitted by Muerssss to amcstock [link] [comments]


2021.04.19 07:24 GodlordHerus Why I didn't buy the dip based on Technical analysis

Introduction
This is an irrational market; DOGE is holding $0.30. So whatever the evidence the opposite may occur
My Technucal Analysis is based on BTC looking at 32 ALT-coins including:
ADA, ALGO, ATOM, BAT, CRV, KNC, KEEP, REP, DOT, XMR, ICX and MANA
I used the 4hrs candles on all ALT-coins with a 21 Exponential Moving Average (EMA) and a 15 Simple Moving Average (SMA). Horizontal Support lines and downward trend lines
BTC I used the Weekly, Daily and 4hrs with a 21 EMA/ 15 SMA. Including horizontal support/resistance, downward trend lines
If you understand basic TA you will be able to do the same in a couple minutes
DATA
BTC entered a price channel on FEB the 8th; which in part has extended to today. The low of this is $41,286.30 and the high is ~$64,900.00. There are 4 key support and resistance lines

  1. $45, 245.40
  2. $51, 510.60
  3. $56,322.70
  4. $59,701.70
Between Feb 25 and Mar 6 BTC was in consolidation between support and resistance 1($45k) and 2 ($51k). It then broke out to the upside to key resistance 4 ($60k). However was rejected and was held by support at 3 ($56k) on the 25th of Mar. The up trend took 9 days and the down trend 12 days. With a second attempts at 4 mid down trend on the 19th, 20th of Mar; all rejected
BTC then was in a up trend from 3 to 4 from the 26th of Mar to 13th of April. On the 13th BTC breaking out of 4 resistance to ~$64,900.00. After which it has entered a downward triangle from shown by markers at 14th Arp and April 17th. BTC failing to find support at 4 ($60k) on the 17th and falling to support at 3 ($56k). However BTC touched support at 2 ($51k) that resulted in the bounce to 3 ($56k)
All ALT-Coins looked at have almost identical graphs. Increased activity during the consolidation of BTC at 4 and falls from each support/resistance in the range of 1.5x to 3x that of BTC a range of -10% to -30%
Currently all have "bounced" from respective support established during consolidation of BTC between Mar 30th and Apr 12.
BTC has consistently tested both Daily SMA and 21 EMA. However it has not tested the Weekly 15 SMA and 21 EMA since October 19th 2020 a 5 month non-test. This is massive over extension and the 21 EMA is currently at $44,769.56 and 15 SMA $49, 715.79
Interpretation
BTC is currently in a downward triangle with main support at 2 ($51k) not 3 ($56k). This is in line with the 15 SMA but not the 21 EMA. Suggesting a re-test is required to continue the upward trend past 4 ($60k) in the near future. If not BTC will continue to over extend itself and become over heated and fail the re-test as selling pressure will increase from the higher spread.
Before the bounce at 2 ( $51k) the difference between price and the 21 EMA was $20,124.99/ a 45% price over extension. The greater this divide the harder the crash
BTC must re-test support 1 ($45k) to continue the bull run with put a major correction. A fall from 2 to 1 is currently plausible without major concern. However a fall from 4+ ($65k - $75k) may be a catalyst in a ALT-coin downward trend. As this will be a -40% correction on BTC and a -60% to -90% in the ALT market
Conclusions or TLDR
BTC isn't out of the woods it needs stronger buying today to close above $58,000.00 but below $60,000.00 for a slow over heating. That it can then consolidate in for at least 2 weeks
If not it has to re-test the 21 EMA at $45,000.00 to continue the bull run. A close today at or below $56,000.00 will be key
Either way today's daily close is probably the most important in this bull run in a while
submitted by GodlordHerus to CryptoCurrency [link] [comments]


2021.04.19 07:24 NeyeKon Losing intentional grain settings after exporting - what am I doing wrong?

After applying grain to some of my images, I always lose the texture after exporting and I'm not sure why. This happens after sending the image with adjustments to photoshop and also when I export them to a folder. A way to counter this is to almost triple the values I have in my grain settings - so when they export the images show the grain I applied to it - but it's never at its precise amount I want for them.
I've Googled far and wide but to no avail.
My current export settings:
- Image Format: JPEG
- Quality: 100
- Color Space: ProPhoto RGB (I've tried sRGB and Adobe 1998, no luck)
- No Resize to Fit and no Output Sharpening
submitted by NeyeKon to Lightroom [link] [comments]


2021.04.19 07:24 kimlingling10 Started it about 6 months ago.

Started it about 6 months ago. submitted by kimlingling10 to BattleJackets [link] [comments]


2021.04.19 07:24 indyglo Easy $50 eToro Signup Bonus (U.S. Only) πŸ”₯

https://etoro.tw/39w5dup
We'll both get $50 bonus when you open an account with eToro, transfer $100 and make any crypto trade within the first 30 days. Once the bonus is added to your account (in 5-7 days), you can withdraw the funds if you choose. When I signed up, I chose Bitcoin (BTC) as my investment and actually made $40 in profit off Bitcoin, on top of the $50 bonus.
eToro is a multi-asset platform which offers both investing in stocks and cryptoassets, as well as trading CFD assets.
submitted by indyglo to moneyontheside [link] [comments]


2021.04.19 07:24 CanadiangirlEH Toothpaste advice for receding gums

Hello! So I have receding gums and I’m saving up to get the gum graft done, but I would love some recommendations as to what the best possible toothpaste for receding gums is. Google just gives me all the toothpaste companies promoting their own products (naturally) but I want to take the best care of them as I can going forward. Paradontax is (apparently) unfortunately not available where I live. Thanks!
submitted by CanadiangirlEH to askdentists [link] [comments]


2021.04.19 07:24 hyperbeast192O Big brain time

Big brain time submitted by hyperbeast192O to meme [link] [comments]


2021.04.19 07:24 mailrameshnarayan Raai Laxmi

Raai Laxmi submitted by mailrameshnarayan to SuperModelIndia [link] [comments]


2021.04.19 07:24 Shotsplat Real gamers don’t play minecrap 🀒🀒🀒😎😎😎

Real gamers don’t play minecrap 🀒🀒🀒😎😎😎 submitted by Shotsplat to Gamingcirclejerk [link] [comments]


2021.04.19 07:24 Master-Mess-7097 Quick question. Does your fuel gauge work, I just wanted to do a quick survey.

submitted by Master-Mess-7097 to G35 [link] [comments]


2021.04.19 07:24 Ariferio Blursed_africa

Blursed_africa submitted by Ariferio to blursedimages [link] [comments]


2021.04.19 07:24 Dejtona He is a lucky boy

He is a lucky boy submitted by Dejtona to formuladank [link] [comments]


2021.04.19 07:24 anthony_v_w Bubbles on my print. Standard PLA settings on Cura and vase mode enabled. Got these bubbles on every side of the print, event the inside.

Bubbles on my print. Standard PLA settings on Cura and vase mode enabled. Got these bubbles on every side of the print, event the inside. submitted by anthony_v_w to FixMyPrint [link] [comments]


2021.04.19 07:24 LordOfCows23 mingeame

mingeame submitted by LordOfCows23 to obungium [link] [comments]


http://ryazangtn.ru/